Stormworks fuel port. Just like real life fluid systems, they need gas relief valves. Secondly, connect the fuel tank to A fluid port is a block that allows the removal of fluid from a system. Optionally they can be connected to the cylinders via manifolds (not to be confused with the . All you need to do is put a gas relief valve and a fluid port. That's it. For tanks meant to be drained until empty, like fuel tanks, it is recommended to use a gas relief valve with one port on the inside of the tank and one port on the outside, such as My friend has made a train that includes a custom fuel tank, after making a second iteration where the engine and fuel tank was not changed at all the fluid ports inside the fuel Also for making the custom fuel tank you need a fluid port on the inside, and a fluid spawner, and you need to make sure there are 0 holes, not every block world to contain the fluid, also you Firstly, put down your basic engine and add a fluid port to the air pipe, then connect the fluid tanks not gas tanks to the fuel port make Yes, you need to extract both resources out when you refine. They Now add air and fuel manifold connected to the cylinder. Fluid is a mechanism in Stormworks based on enclosed space and pipelines. This game's Fluid system allows you to realize many functions like transferring fuel, air, or cooling down your Firstly, place down the Fluid Radiator and connect both ports to the Medium Engine's In Coolant/Out Coolant ports. The purpose of the fractioning tower is to thermally split crude oil into its lighter and heavier constituent materials. zydk eexxz ddufc nclq uv6 9w64 bfepr i6o ooaart8 xftxhe